The edge collapse problem of edge banding machine is also quite common. It is mainly manifested in the tearing or damage of the edge of the edge banding after the edge banding machine is used to band the board.
There are several ways to solve the edge collapse problem of edge banding machine:
1. Choose a suitable edge banding machine
Different boards require edge banding strips of different models and thicknesses, so it is very important to choose the corresponding edge banding machine. When purchasing, you should choose an edge banding machine according to actual needs. You cannot choose an edge banding machine of poor quality in pursuit of low prices.
2. Clean the edge banding machine
After the edge banding machine has been used for a period of time, dust and sawdust will accumulate on the edge banding machine mouth and belt. When banding, these impurities and residues will be squeezed into the gap of the edge banding strip, resulting in edge collapse after edge banding. To clean the edge banding machine, you need to disassemble the edge banding machine and use a detergent to thoroughly clean and dry it to prevent the residue from continuing to affect the use of the edge banding machine.
3. Operation specification
Before edge banding, the board should be sanded to keep the board surface flat and without protrusions, otherwise it is easy to cause the edge banding strip to be pulled and the edge to collapse. When edge banding, the speed and pressure of the edge banding machine should be kept stable to avoid fast in and fast out or slow in and fast out, which will cause the edge banding strip to pull and deform.
4. Fully preheat the board
When using the edge banding machine to edge band, it is recommended to preheat the board for a period of time to restore it to room temperature and increase the softness of the material, thereby reducing the tension during edge banding and avoiding edge collapse caused by the shrinkage of the board during edge banding.
5. Adjust the parameters of the edge banding machine
The speed, temperature, pressure and other parameters of the edge banding machine will affect the edge banding effect. Different boards need to adjust the parameters in a targeted manner to ensure the quality of edge banding. Generally speaking, different temperatures and pressures should be adjusted for different edge banding materials and widths, and the edge banding speed and inlet and outlet width should be adjusted accordingly according to actual conditions.
6. Use high-quality edge banding strips
The quality of the edge banding strip material will also affect the edge banding effect. The use of poor quality edge banding strips will lead to problems such as weak adhesion, lack of flexibility, easy tearing and cracking of the edge banding strips, which will lead to the failure of edge banding and the occurrence of edge collapse problems. It is recommended to choose high-quality edge banding strips to avoid affecting the quality of edge banding.
In short, it is very important to ensure the normal use and regular maintenance of the edge banding machine. It is necessary to follow the correct operating specifications and choose the appropriate edge banding strip materials and quality to eliminate the edge collapse problem of the edge banding machine to the greatest extent and ensure the good quality of the edge banding effect.
Post time: Jun-03-2024
